SRMD205

PHOTOS
SPEC
FEATURES
SUPPORT

SPN : Seafoam Pearl Green

COLOR VARIATION：

SR MEZZO

SPEC

SPECS
- neck type
  
  SRMD5Maple neck
- top/back/body
  
  Poplar body
- fretboard
  
  Maple fretboardBlack dot inlay
- fret
  
  Medium frets
- number of frets
  
  22
- bridge
  
  B15W bridge
- string space
  
  18mm
- neck pickup
  
  Dynamix P neck pickupPassive
- bridge pickup
  
  Dynamix J bridge pickupPassive
- equaliser
  
  Ibanez Custom Electronics 2-band EQ
- factory tuning
  
  1G,2D,3A,4E,5B
- strings
  
  D'Addario® EXL165 + .130 medium
- string gauge
  
  .045/.065/.085/.105/.130
- hardware color
  
  Chrome
NECK DIMENSIONS
- - Scale :
    
    812mm/32"
  - a : Width
    
    45mm at NUT
  - b : Width
    
    73mm at 22F
  - c : Thickness
    
    19.5mm at 1F
  - d : Thickness
    
    21.5mm at 12F
  - Radius :
    
    305mmR
- DESCRIPTION
  
  Guitar Neck Diagram
  a: Width of the neck at the nut
  b: Width of the neck at the fret position specified by the neck dimension
  c: Thickness of the neck at the first fret
  d: Thickness of the neck at the fret position specified by the neck dimension
  Radius: Radius of the fingerboard
CONTROLS

DESCRIPTION

With the bass held in the playing position, there are two small knobs located along the lower edge of the body. The knob close to the end of the body is the treble boost/cut knob, and the one closer to the neck is the bass boost/cut. Above these, there are two more knobs closer to the bridge. The one closest to end of the body is the pickup balancer, and the other is the volume knob. You can adjust piezo gain for each strings with the trim pots located on the back panel. Turn the trim pot clockwise with a Philips head screwdriver to boost the gain, and turn the trim pot counter clockwise to cut the gain. The trim pots are lined up in order of the strings.
FREQUENCY RESPONSE

DESCRIPTION

The bass boost/cut frequency curve has a peak at 20 Hz and a variable width that decreases toward the high range, and a curve that the variable width becomes zero at approximately 1000 Hz. The variable range becomes slightly larger in the high range than around 1000 Hz, but it becomes zero again near 5000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve creates a bell-shaped curve with a peak around 10000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB.
OTHER FEATURES
- Recommended Case
- MRB350C
- 32 inch scale