SRC6MS

SPEC

SPECS
- neck type
  
  SRC65pc Jatoba/Walnut neck
- top/back/body
  
  Okoume body
- fretboard
  
  Rosewood fretboardAbalone Step off-set dot inlay
- fret
  
  Medium frets
- bridge
  
  Mono-rail bridge
- string space
  
  10.8mm
- neck pickup
  
  Bartolini® BH2 neck pickupPassive
- bridge pickup
  
  Bartolini® BH2 bridge pickupPassive
- equaliser
  
  Ibanez Custom Electronics 3-band EQ w/EQ bypass switch (passive tone control on treble pot), 3-way Mid frequency switch
- factory tuning
  
  1E,2B,3G,4D,5A,6E
- strings
  
  D'Addario® EXL156
- string gauge
  
  .024/.034/.044/.056/.072/.084
- hardware color
  
  Cosmo black
NECK DIMENSIONS
- - Scale :
    
    762mm/30" - 724mm/28.5"
  - a : Width
    
    42mm at NUT
  - b : Width
    
    58mm at 22F
  - c : Thickness
    
    19.5mm at 1F
  - d : Thickness
    
    21.5mm at 12F
  - Radius :
    
    400mmR
- DESCRIPTION
  
  Guitar Neck Diagram
  a: Width of the neck at the nut
  b: Width of the neck at the fret position specified by the neck dimension
  c: Thickness of the neck at the first fret
  d: Thickness of the neck at the fret position specified by the neck dimension
  Radius: Radius of the fingerboard
CONTROLS

DESCRIPTION

With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid frequency switch. When the switch is in neck position, mid boost peak is at 250Hz. When the switch is in center position, mid boost peak is at 450Hz. When the switch is in bridge position, mid boost peak is at 700Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in neck position, the EQ is off. When the switch is in bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.
FREQUENCY RESPONSE

DESCRIPTION

The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450 and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.
OTHER FEATURES
- Recommended Case
- MRB350C
- Ibanez machine heads

Features

5pc Jatoba/Walnut neck

The 5pc Jatoba/Walnut neck provides tonal clarity and superior attack.

Multi scale

The multi scale construction equalizes tension of each string and it helps to create a more ”alive”, open tone. But the design also improves player comfort. The multi scale construction ergonomically coordinates with the way a player's hand angles as it moves up and down the neck, facilitating quick, comfortable playing action.

Rosewood fretboard

Rosewood fretboard provides a well-balanced solid tone with a focused mid range.

Okoume body

The Okoume body provides a bright and solid sound.

Bartolini® BH2 pickups

The Bartolini® BH2 pickups provide a tight bottom-end, punchy mid-range, and smooth response. The dual-coil style configuration maximizes articulation and a long blade pole piece widens the magnetic field, providing balanced string-to-string pickup response.

Mono-rail bridge

Designed for both stability and sustain, the innovative Ibanez Mono-Rail bridge minimizes cross-talk between strings

Ibanez Custom Electronics 3-band EQ w/EQ bypass switch(passive tone control on treble pot) & 3-way Mid frequency switch

The Ibanez Custom Electronics 3-band EQ is our latest refinement on the concept of simple, straightforward, no-nonsense EQ control. The Boost and Cut for the Mid Control are each centered on slightly different frequencies, an innovation that delivers a preset range of the most favorable bass tones.
The EQ bypass control offers precision tonal adjustments, including a switch to choose passive-only operation. When the EQ bypass is activated, the treble tone control knob becomes the global tone control for the passive circuit.
The 3-way Mid frequency switch allow players to change the mid-tone between 250, 450, and 700 Hz.

SPEC

SPECS

NECK DIMENSIONS

CONTROLS

FREQUENCY RESPONSE

OTHER FEATURES