TQM

TQM1 MADE IN JAPAN

FINISHES

SPEC

neck typeTQM S-TECH WOOD Roasted Maple neck
bodyMonkeypod top/Alder body
fretboardS-TECH WOOD Roasted Maple fretboard w/Abalone dot inlay
fretJumbo Stainless Steel frets
bridgeGotoh® T1802 tremolo bridge
neck pickupSeymour Duncan® Hyperion™ (S) neck pickup (Passive/Alnico)
middle pickupSeymour Duncan® Hyperion™ (S) middle pickup (Passive/Alnico)
bridge pickupSeymour Duncan® Hyperion™ (H) bridge pickup (Passive/Alnico)
factory tuning1E, 2B, 3G, 4D, 5A, 6E
string gauge.010/.013/.017/.026/.036/.046
nutBone nut
hardware colorChrome
case/bagHardshell case included

Neck Dimensions

Scale :648mm/25.5"
a : Width42mm at NUT
b : Width56.4mm at 22F
c : Thickness20.5mm at 1F
d : Thickness22.5mm at 12F
Radius :305mmR

SWITCHING SYSTEM

CONTROLS

OTHERS

  • dyna-MIX9 switching system w/Alter Switch
  • Luminescent side dot inlay
  • Gotoh® MAGNUM LOCK machine heads w/H.A.P.

FEATURES

AZ Oval C S-TECH WOOD Roasted Maple neck

S-TECH special roasted treatment increases the wood's stability, durability, water resistance and tolerance of temperature changes. The neck is sealed with an oil finish which helps make it feel similar to a well-played guitar neck.

S-TECH WOOD Roasted Maple fretboard w/Abalone dot inlay

This is the first time S-TECH WOOD Roasted Maple is being used in guitar construction. The wood goes through a special nitrogen-heating treatment which increases the woods stability and water resistance. It offers and increased tolerance to temperature changes.

Super All Access Neck Joint

The Super All Access Neck Joint offers superior playability with its 8mm concave curve from the body top to the spherical surface of the joint area. By maximizing the joint area between the body and the neck, sustain and resonance are increased as well.

Monkeypod top/Alder body

The TQM1 features Monkeypod body top which features a unique wood grain that provides clarity and superior artiiculation.

Luminescent side dot inlay

The luminescent side dot position marks make it easy for players to see fretboard position marks when performing on dark stages.

Gotoh® Magnum Lock machine heads w/H.A.P.(Height Adjustable Post)

The AZ comes with GOTOH® MAGNUM LOCK® machine heads, which have an established reputation for tuning stability. Its H. A. P® (Height Adjustable Post). system allows for the adjustment of string posts for the appropriate tension of each string.

Oil-impregnated Bone nut /Stainless Steel Frets

The Oil-impregnated bone nut provides superior tuning stability and warm rich resonance. Stainless steel frets boast excellent corrosion resistance. The wide and tall fret-type offers a quick response, good articulation when playing chords and clear tone when playing single notes.

Seymour Duncan® Hyperion™ Pickups

Seymour Duncan® Hyperion™ Pickups feature a moderate output through Alnico-5 magnets to keep the clarity of the fundamental tone when using a distortion sound, and to deliver a clear pick attack. From treble to bass, the overall tonal balance is evenly adjusted., and works well with various effect pedals.

dyna-MIX 9 switching system w/Alter switch

dyna-MIX 9 offers nine sound variations, and can easily switch between humbucker and single coil modes with just the mini switch. One mode is even able to simulate a humbucker sound from the combination of the 2 single coil pickups.

Ibanez T1802 synchronized bridge (Made by Gotoh®)

T1802 tremolo bridge features machined titanium saddles and a machined steel tremolo block for a quick response, thick lows and rich highs.
The 10.5mm string spacing allows for easy picking across strings. Its snap-in construction makes it easy to load a tremolo arm.

Videos

SUPPORT

PAGE TOP